LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 - Manual (Page 28)

14
Remote Control (16 Channel)
Remote Control (16 Channel)
The remote control is the secondary input
device for navigating the system’s interface.
To use the remote control:
1 REC: Starts system recording.
• SEARCH: Opens the Search menu.
• Number Keys (1 -0): Opens the desired
channel in full screen mode. Press 1+0 for
channel 10, 1+1 for channel 11 etc. Press
0 three times to change to BNC or VGA out.
• Display Mode : Press repeatedly to change
viewing modes (i.e. press once to swtich to
quad view (ch 1-4), press twice to view channel
5-8 etc.)
• 2x2 / 3x3 / 4x4 : Opens the window in grid
mode.
• AUTO : Starts sequence view.
2 Navigation Cursors : Use the navigation
cursors to navigate the menu.
•
ENTER : Confirms the selection in the menu.
• Press to access System Information during live
view.
3 MENU/ESC: Opens the Sub menu. Within
menus, the MENU button is used to exit the
menu.
• PIP: Opens the picture-in-picture view.
• MUTE: Mutes audio channel during live
view and playback.
4 Playback Controls :
• FWD : During playback, press repeatedly to
increase playback speed
• REW : During playback, press repeatedly to
increase reverse playback speed
• PLAY :
• In live view, press to open the Record
Search Menu
• During playback, press to play video.
• STOP : Press to stop recording.
• PAUSE/FRAME:
• Press to pause video during playback
• Press repeatedly to play frame by
frame during playback
1
2
3
4
5
5 PTZ Controls:
• Z+/Z- : Adjust camera Zoom.
• F+/F- : Adjust camera Focus.
• I+/I-: Adjust camera Iris.
• PTZ: Opens the PTZ menu.
• LOCK: Locks the system screen.