LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 - Manual (Page 134)

120
Appendix M: Assigning camera channels (16 Ch. only)
Appendix M: Assigning camera channels (16 Ch. only)
In the 16 channel model, you can re-assign camera channels. For example, you can have
the video feed from channel 16 appear on channel 1. This gives you the flexibility to
re-arrange the order that your camera channels are displayed.
To re-assign your cameras:
1 Right-click anywhere in the main menu>Main Menu> Advance> A/V Setup.
2 Configure the following:
• Video Output: Select MAIN-OUT or SPOT OUT.
• Spot Audio: Select the channel that you wish to output audio from (Available only if you select
SPOT OUT in the Video Output drop-down menu.
• View Setup: Select Enable.
• View Mode: Select the number of channels you would like to configure. Choose from Single,
Quarter, Ninth (9 channels ), Sixteenth (16 channels, available only if you select MAIN OUT
as the Video Output).
NOTE: The 16 channel configuration (shown as "Sixteenth" in the menu) is only available
if you select MAIN-OUT in the Video Output drop-down menu.
3 Click the VOUT Sequence Setup button (or the SPOT Sequence Setup button if you select
SPOT OUT as your Video Output).
Video Output
View Setup