LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 - Manual (Page 95)

81
Remote Viewing
Configuring DST (Daylight Saving Time) Settings
If your region observes DST, use the DST menu to configure when the system changes its
time.
To configure DST settings:
1 Click Remote Setting>System>DST.
2 Configure the following:
• DST: Select Enable or Disable.
• Time Offset: Select 1hr or 2hr time offsets.
• Daylight Saving Time Mode: Select Week or Date.
• Start Time: Select the starting month, date and time DST should begin.
• End Time: Select the ending month, date and time DST should end.
• If you select Date in the Daylight Saving Time Mode drop-down menu, select the desired date
and start time DST should begin.
3 Click Apply to save your settings.
Click the Date drop down menu
Enter the DST start and end time