Linksys VOICE SYSTEM SPA 900 SERIES - Manual (Page 120)

5-15
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
SIP Tab
INFOREQ Dynamic Payload
(not applicable to SPA901)
INFOREQ dynamic payload type.
Defaults to blank.
G726r16 Dynamic Payload G.726-16 dynamic payload type. Ranges from 96-127.
Defaults to 98.
G726r24 Dynamic Payload G.726-24 dynamic payload type. Ranges from 96-127.
Defaults to 97.
G726r32 Dynamic Payload
(not applicable to SPA901)
G726r32 dynamic payload type.
Defaults to 2.
G726r40 Dynamic Payload G.726-40 dynamic payload type. Ranges from 96-127.
Defaults to 96.
G729b Dynamic Payload G.729b dynamic payload type. Ranges from 96-127.
Defaults to 99.
EncapRTP Dynamic Payload
(not applicable to SPA901)
EncapRTP Dynamic Payload type.
Defaults to 112.
RTP-Start-Loopback Dynamic
(not applicable to SPA901)
RTP-Start-Loopback Dynamic Payload.
Defaults to 113.
RTP-Start-Loopback Codec
(not applicable to SPA901)
RTP-Start-Loopback Codec. Select one of following: G711u, G711a, G726-16, G726-24,
G726-32, G726-40, G729a, or G723.
Defaults to G711u.
AVT Codec Name
(not applicable to SPA901)
AVT codec name used in SDP.
Defaults to telephone-event.
G711u Codec Name
(not applicable to SPA901)
G.711u codec name used in SDP.
Defaults to PCMU.
G711a Codec Name
(not applicable to SPA901)
G.711a codec name used in SDP.
Defaults to PCMA.
G726r16 Codec Name
(not applicable to SPA901)
G.726-16 codec name used in SDP.
Defaults to G726-16.
G726r24 Codec Name
(not applicable to SPA901)
G.726-24 codec name used in SDP.
Defaults to G726-24.
G726r32 Codec Name
(not applicable to SPA901)
G.726-32 codec name used in SDP.
Defaults to G726-32.
G726r40 Codec Name
(not applicable to SPA901)
G.726-40 codec name used in SDP.
Defaults to G726-40.
Field Description