Linksys VOICE SYSTEM SPA 900 SERIES User Manual
Page 43
2-20
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 2 Getting Started
Using the Interactive Voice Response Interface
For example, to input password test#@1234 by phone keypad, you need to press the following
sequence of digits: 8378001234.
1.
After entering a value, press the # (pound) key to indicate end of input.
–
To save value, press 1.
–
To review the value, press 2.
–
To re-enter the value, press 3.
–
To cancel the value entry and return to the main configuration menu, press
*
’ (star).
Notes:
–
The final # key is not included in the password value.
–
Saved settings take effect when the telephone is hung up, and if necessary, the Linksys IP phone
automatically reboots.
2.
After one minute of inactivity, the unit times out. The user needs to re-enter the configuration menu
from the beginning by pressing * * * *.