Linksys VOICE SYSTEM SPA 900 SERIES - Manual (Page 41)

2-18
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 2 Getting Started
Using the Interactive Voice Response Interface
Set Static IP Address 111 Enter IP address using
numbers on the telephone
key pad. Use the * (star) key
when entering a decimal
point. DHCP must be “Disabled,” otherwise you
hear, “Invalid Option,” if you try to set
this value.
Requires password
Check Network Mask 120 None IVR announces the current network mask
of SPA.
Set Network Mask 121 Enter value using numbers on
the telephone key pad. Use
the * (star) key when entering
a decimal point. DHCP must be “Disabled,” otherwise you
hear, “Invalid Option,” if you try to set
this value.
Requires password
Check Static Gateway IP
Address 130 None IVR announces the current gateway IP
address of SPA.
Set Static Gateway IP
Address 131 Enter IP address using
numbers on the telephone
key pad. Use the * (star) key
when entering a decimal
point. DHCP must be “Disabled,” otherwise you
hear, “Invalid Option,” if you try to set
this value.
Requires password
Check MAC Address 140 None IVR announces the MAC address of SPA
in hex string format.
Check Firmware Version 150 None IVR announces the version of the
firmware running on the SPA.
Check Primary DNS
Server Setting 160 None IVR announces the current setting in the
<Primary DNS> parameter.
Set Primary DNS Server 161 Enter IP address using
numbers on the telephone
key pad. Use the * (star) key
when entering a decimal
point. Requires password
Check administration web
server port 170 None IVR announces the port that the web
server is listening on. (Default is 80)
Check LAN IP Address 210 None IVR announces the current IP address of
the LAN port.
Check PBX multicast
address 180 None IVR announces the current value.
Set PBX multicast
address 181 Enter IP address and port.
Use * key for entering a dot.
For example,
224.168.168.169:8089 is
224*168*168*169*8089. Enter a * between the IP address and the
Port fields. Requires password
Enable/Disable
administration web server 7932 Enter 1 to enable
Enter 0 to disable
Requires password
Table 2-2 IVR Options (continued)