932 tab (spa962 only), General – Linksys VOICE SYSTEM SPA 900 SERIES User Manual
Page 156
5-51
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
932 Tab (SPA962 only)
932 Tab (SPA962 only)
This tab includes the following sections:
•
•
•
General
Field
Description
Subscribe Expires
Specifies how long the subscription remains valid. After the specified period of time,
elapses, the SPA932 initiates a new subscription.
Defaults to 1800.
Subscribe Retry Interval
Specifies the length of time to wait to try again if subscription fails.
Unit 1 Enable
Enables or disables the first SPA932 unit (each SPA962 can have up to two SPA932s
attached).
Subscribe Delay
Length of delay before attempting to subscribe.
Defaults to 1.
Test Mode Enable
Enables or disables test mode. When test mode is enabled, the LEDs are turned on when
keys are pressed, going from off to green to red, and back to off. In test mode, when all
the buttons on the sidecar are returned to off, all the keys become amber. The SPA962
must be rebooted after the test is completed.
Unit 2 Enable
Enables or disables the second SPA932 unit (each SPA962 can have up to two SPA932s
attached).
Server Type
Selects the type of server used.
Call Pickup Code
The star code used for picking up a ringing call.
Defaults to *98.