Getting started, Linksys 900 series ip phones, C h a p t e r – Linksys VOICE SYSTEM SPA 900 SERIES User Manual
Page 24: Chapter 2, “getting started
2-1
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 2 Getting Started
Linksys 900 Series IP Phones
2
Getting Started
This chapter describes the tools and utilities available for administering Linksys phones. It includes the
following sections:
•
Linksys 900 Series IP Phones, page 2-1
•
SPA9000 IP PBX System, page 2-9
•
Establishing Connectivity, page 2-9
•
Using the Administration Web Server, page 2-12
•
•
•
Using the Interactive Voice Response Interface, page 2-16
Note
If the Linksys IP phone is supplied or sponsored by an Internet Telephone Service Provider (ITSP),
certain network and service settings may be preconfigured. Depending on the configuration policy,
access by an end user to specific configuration settings may be restricted or blocked.
Linksys 900 Series IP Phones
The Linksys provides fully-featured VoIP phones that integrate with the Linksys SPA9000 to provide
connectivity to other local stations, and through an ITSP to IP phones over the Internet, In addition, the
optional SPA400 integrates with the SPA9000 and provides connectivity between SPA900 IP phones and
the PSTN. This section summarizes the ports and hardware features provided by each device. It includes
the following topics:
•
Caring for Your Hardware, page 2-2
•
•
SPA92x, SPA94x, and SPA962 Hardware Features, page 2-3
•
SPA92x, SPA94x, and SPA962 Hardware Features, page 2-3
•
•
•
•
•