Linksys VOICE SYSTEM SPA 900 SERIES - Manual (Page 152)

5-47
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Ext Tab
Field Description
Dial Plan Dial plan script for this line.
The dial plan syntax is expanded in the SPA to allow the designation of three parameters
to be used with a specific gateway:
• uid – the authentication user-id
• pwd – the authentication password
• nat – if this parameter is present, use NAT mapping
Each parameter is separated by a semi-colon (;).
Furthermore, it recognizes gw0, gw1, …, gw4 as the locally configured gateways, where
gw0 represents the local PSTN gateway in the same unit.
Example 1:
*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=xyz
Example 2:
*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz
Example 3:
[39]11<:@gw0>
Enable IP Dialing Enable or disable IP dialing.
Defaults to no.