Replacement procedures, Troubleshooting & repair, Materials needed – Lincoln Electric IDEALARC DC 1000 SVM123-A User Manual
Page 85: Input contactor (1cr) cleaning and/or replacement, Warning
F-45
TROUBLESHOOTING & REPAIR
F-45
IDEALARC DC-1000
Service and repair should be performed only by Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment could result in danger to the technician or
the machine operator and will invalidate your factory warranty. For your safety and to avoid
electrical shock, please observe all safety notes and precautions detailed throughout this
manual.
If for any reason you do not understand the test procedures or are unable to perform the
tests/repairs safely, contact the Lincoln Electric Service Department for technical trou-
bleshooting assistance before you proceed.
Call (216) 383-2531 or (800) 833-9353 (WELD).
_____________________________________________________________
INPUT CONTACTOR (1CR) CLEANING AND/OR REPLACEMENT
MATERIALS NEEDED
7/16” socket wrench
1/2” open end wrench
11/16” socket wrench
Phillips head screwdriver
Flat head screwdriver
Low pressure air source
WARNING