Troubleshooting & repair, Reassembly of lift bail, Removal and reassembly of lift bail – Lincoln Electric IDEALARC DC 1000 SVM123-A User Manual

Page 97

Advertising
background image

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

TROUBLESHOOTING & REPAIR

F-57

REASSEMBLY OF LIFT
BAIL

1.

Place the lift bail onto the IDE-
ALARC DC-1000 from the top, low-
ering straight onto the unit.

2.

Using a 9/16” socket wrench, attach
the four bolts and associated wash-
ers mounting the lift bail to the base
assembly.

3.

Using a 9/16” socket wrench, attach
the four bolts mounting the lift bail
to the main transformer assembly.

4.

Using a 3/8” socket wrench, attach
the two screws holding the input
contactor bracket to the lift bail.

5.

Reattach leads #217 and #222 to
resistor R2.

6.

Reattach or reconnect any cables
or wire ties previously removed.

7.

Using a 5/16 (8mm) nut driver or
flat head screw driver, attach 20
screws (ten per side) to secure
case sides, and 2 screws to secure
top.

REMOVAL AND REASSEMBLY OF LIFT BAIL

IDEALARC DC-1000

F-57

Advertising