Lexmark 410 User Manual
User's guide
Advertising
Table of contents
Document Outline
- Contents
- Safety information
- Learning about the printer
- Additional printer setup
- Installing internal options
- Installing hardware options
- Attaching cables
- Verifying printer setup
- Setting up the printer software
- Setting up wireless printing
- Installing the printer on a wired network
- Changing port settings after installing a new network Internal Solutions Port
- Setting up serial printing
- Minimizing your printer's environmental impact
- Loading paper and specialty media
- Paper and specialty media guidelines
- Printing
- Understanding printer menus
- Maintaining the printer
- Administrative support
- Clearing jams
- Troubleshooting
- Understanding printer messages
- Change <src> to <custom type name>
- Change <src> to <custom string>
- Change <src> to <size>
- Change <src> to <type> <size>
- Close front door
- Close top access cover and front door
- Disk Corrupted
- Insert tray <x>
- Load <src> with <custom type name>
- Load <src> with <custom string>
- Load <src> with <type> <size>
- Load <src> with <size>
- Load Manual Feeder with <custom type name>
- Load Manual Feeder with <custom string>
- Load Manual Feeder with <type> <size>
- Load Manual Feeder with <size>
- Remove all color supplies
- Remove paper from standard output bin
- Remove packaging material, check <area name>
- Securely clearing disk space
- Restore Held Jobs?
- Some held jobs were not restored
- Unsupported disk
- Unsupported mode, unplug and change mode
- Unsupported USB hub, please remove
- Unsupported USB device, please remove
- 31.yy Missing or defective <color> cartridge
- 32.yy <Color> cartridge part number unsupported by device
- 34 Short paper
- 35 Insufficient memory to support Resource Save feature
- 37 Insufficient memory to collate job
- 37 Insufficient memory, some held jobs were deleted
- 37 Insufficient memory, some held jobs will not be restored
- 38 Memory full
- 39 Complex page, some data may not have printed
- 51 Defective flash detected
- 52 Not enough free space in flash memory for resources
- 54 Network <x> software error
- 54 Standard network software error
- 55 Unsupported option in slot <x>
- 56 Parallel port <x> disabled
- 56 Serial port <x> disabled
- 56 Standard USB port disabled
- 57 Configuration change, held jobs were not restored
- 58 Too many disks installed
- 58 Too many flash options installed
- 58 Too many trays attached
- 59 Incompatible tray <x>
- 61 Remove defective hard disk
- 62 Disk full
- 63 Unformatted disk
- 80.xx Fuser near life warning
- 80.xx Fuser life warning
- 80.xx Replace fuser
- 80.xx Fuser missing
- 82.yy Replace waste toner box
- 82.yy Waste toner box nearly full
- 82.yy Waste toner box missing
- 83.xx Transfer module near life warning
- 83.xx Transfer module life warning
- 83.xx Replace transfer module
- 83.xx Transfer module missing
- 84.xx <color> photoconductor low
- 84.xx <color> photoconductor nearly low
- 84.xx Replace <color> photoconductor
- 84.xx <color> photoconductor missing
- 88.yy <color> cartridge low
- 88.1x <color> cartridge nearly low
- 88.2x Replace <color> cartridge
- Solving basic problems
- Solving printing problems
- Multiple-language PDFs do not print
- Printer control panel display is blank or displays only diamonds
- Error message about reading USB drive appears
- Jobs do not print
- Make sure the printer is ready to print
- Check to see if the standard exit bin is full
- Check to see if the paper tray is empty
- Make sure the correct printer software is installed
- Make sure the internal print server is installed properly and working
- Make sure you are using a recommended printer cable
- Make sure printer cables are securely connected
- Confidential and other held jobs do not print
- Job takes longer than expected to print
- Job prints from the wrong tray or on the wrong paper
- Incorrect characters print
- Tray linking does not work
- Large jobs do not collate
- Unexpected page breaks occur
- Solving option problems
- Solving paper feed problems
- Solving print quality problems
- Isolating print quality problems
- Blank pages
- Characters have jagged or uneven edges
- Color misregistration
- Clipped images
- Fine horizontal lines appear on color pages
- Ghost images
- Gray background
- Incorrect margins
- Light colored line, white line, or incorrectly colored line
- Paper curl
- Print irregularities
- Print is too dark
- Print is too light
- Repeating defects
- Skewed print
- Solid color pages
- Streaked horizontal lines
- Streaked vertical lines
- Toner fog or background shading appears on the page
- Toner rubs off
- Toner specks
- Transparency print quality is poor
- Uneven print density
- Solving color quality problems
- Contacting Customer Support
- Understanding printer messages
- Notices
- Product information
- Edition notice
- UNITED STATES GOVERNMENT RIGHTS
- Trademarks
- Federal Communications Commission (FCC) compliance information statement
- Modular component notice
- Noise emission levels
- Waste from Electrical and Electronic Equipment (WEEE) directive
- Static sensitivity notice
- ENERGY STAR
- Temperature information
- Laser notice
- Laser advisory label
- Power consumption
- European Community (EC) directives conformity
- Regulatory notices for wireless products
- Exposure to radio frequency radiation
- Industry Canada (Canada)
- Notice to users in the European Union
- Statement of Limited Warranty
- LEXMARK SOFTWARE LIMITED WARRANTY AND LICENSE AGREEMENT
- ADOBE SYSTEMS INCORPORATED NOTICE
- Index