Lanier 5625 - Manual (Page 123)

If You Cannot Make Copies as You Want
111
5
If You Cannot Make Copies as You Want
Problem Cause Action
Copies appear dirty. The image density is too
dark. Adjust the image density.
⇒
P.28 “Adjusting Copy Im-
age Density”.
Adjust the background
density.
⇒
P.98 “Image Ad-
justment”.
The exposure glass or doc-
ument feeder belt is dirty. Clean them.
⇒
P.149
“Maintaining Your Ma-
chine”
The reverse side of an orig-
inal image is copied. The image density is too
dark. Adjust the image density.
⇒
P.28 “Adjusting Copy Im-
age Density”.
If you select Black Copy
mode or Single Color
mode, place a black sheet
of paper under the reverse
side of the original and se-
lect Auto Image Density
mode.
Lighten the background
density.
⇒
P.98 “Image Ad-
justment”.
A shadow is copied when
copying a pasted original. The image density is too
dark. Adjust the image density.
⇒
P.28 “Adjusting Copy Im-
age Density”.
Adjust the background
density.
⇒
P.98 “Image Ad-
justment”.
Set the original in a differ-
ent direction.
Put mending tape on the
bound part.
Copies are too light. The original has a low con-
trast image. Adjust the image density.
⇒
P.28 “Adjusting Copy Im-
age Density”.
The image density is too
light.
Damp or rough grain pa-
per is used Use dry paper without
rough grain.