Lanier 5625 - Manual (Page 62)

Copying
50
2
B
Select [Duplex] , or [Duplex Thick] with the <> keys.
Note
❒ To copy onto non-standard size paper, press the [Custom] key and select or
enter the size. For details,
⇒
P.44 “Copying onto non-standard size paper with
the bypass tray”.
C
Press the [OK] key.
D
Adjust the paper guides to the paper size.
Note
❒ Make sure that the paper guides match the paper size. If the paper guides
are not adjusted to the paper size properly, paper might be skewed or pa-
per misfeeds might occur.
E
Insert the paper into the bypass tray.
Note
❒ Make sure that front side (the side that has been copied onto) faces down.
F
Set your originals, then press the { Start } key.
Auto Reduce/Enlarge
The machine can select the proper reproduction ratio based on the selected pa-
per size and the original size.