Lanier 5625 - Manual (Page 161)

Maintaining Your Machine
149
7
Maintaining Your Machine
If the exposure glass, platen cover or document feeder belt is dirty, you might
not be able to make copies as you want. Clean them if you find them dirty.
Note
❒ Wipe the machine with a soft, damp cloth. Then wipe it with a dry cloth to
remove water.
❒ Do not use chemical cleaner or organic solvent, such as thinner or benzene. If
they get into the machine or melt plastic parts, a failure might occur.
❒ Do not clean parts other than those specified in this manual. Such parts
should be cleaned by your service representative.
Exposure Glass
Platen Cover