Lanier 5625 User Manual
Page 77
Reduce/Enlarge
65
2
1.
Horizontal original size
2.
Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
The suitable reproduction ratios will be automatically selected when you enter
the horizontal and vertical lengths of the original and copy image you want.
Note
❒ You can enter sizes within the following ranges:
❒ If the calculated ratio is over the maximum or under the minimum ratio, it is
corrected within the range of the ratio automatically. However, with some ra-
tios, parts of the image might not be copied or blank margins will appear on
copies.
A
Press the {
Menu
} key.
Note
❒ If you have assigned the Directional Size Magnification (inch) function to
one of the {
Favorite
} keys, press it and go to step
D. To assign a function to
the {
Favorite
} keys,
⇒
P.144 “Set favorite keys”.
B
Press the
[
↓
Next]
key until
[D. Size Mag. (inch)]
is displayed.
Metric Version
1 - 999mm (in 1mm steps)
Inch Version
0.1" - 99.9" (in 0.1" steps)