Lanier 5625 User Manual
Page 145
User Tools
133
6
Tray Priority
You can select the paper tray which will be selected as a
default in the following conditions:
• When the main power switch or operation switch is
turned on.
• When System Reset or Auto Reset mode is turned on.
• When the {
Clear Modes
} key is pressed.
Note
❒ Default: Tray 1
❒ Tray 2, Tray 3, and Tray 4 are options.
Auto Tray Switch
If you load paper of the same size in two or more trays,
the machine automatically shifts another tray when the
tray in use runs out of paper. You can set or cancel this
setting.
Note
❒ Default: Off
Interleave Print
In this settings On, a print job can interrupt a copy job
and vice versa.
Note
❒ Default: On
Output Tray Prio. (For 3-
bin sorter only)
You can specify a bin to which documents are delivered
for each feature (copy and printer).
A
Select
[Copy]
or
[Printer]
with the <> keys. Then
press the
[OK]
key.
B
Select a bin with the <> keys. Then press the
[OK]
key.
Note
❒ Default:
• Copy: First bin
• Printer: First bin
Display Contrast
You can adjust the brightness of the panel display.
Note
❒ Default: level 4
Menu
Description