Lanier 5625 - Manual (Page 35)

Setting Originals of Different Sizes in the Document Feeder
23
1
Setting Originals of Different Sizes in the
Document Feeder
Preparation
To use this function, you have to select ADF Mixed Sizes mode with the user
tools.
⇒
P.142 “ADF/Sorter”.
You can insert a stack of originals of different standard sizes (e.g. A4, B5 etc.) into
the document feeder. These originals are individually fed onto and removed
from the exposure glass.
Limitation
❒ The weight of originals that can be set with this function is 52 - 81g/m 2 , 14 -
20 lb.
❒ Smaller size originals might be skewed a little.
Note
❒ If your stack of originals contains pages of different sizes, make sure that:
• Longer originals are at the bottom of the stack, and shorter originals are at
the top.
• All originals are flush with the back fence of the document feeder.
A
Align the rear and left edges of the originals as shown in the illustration.
1. Document feeder feed direction
2. Vertical size
B
Adjust the guide to the widest original size.
C
Set the aligned originals face up into the document feeder.