Lanier 5625 - Manual (Page 66)

Copying
54
2
Program
You can store up to five frequently used copy job settings in machine memory
and recall them for future use.
Storing your settings
A
Set the copy settings you want to put into memory.
B
Press the { Program } key.
C
Press the [Store] key.
D
Select the program number you want to store the settings in with the <>
keys. Then press the
[OK] key.
Note
❒ If this program number is already used, the machine asks whether you
wish to overwrite it or not. Press the [Yes] or [No] key.