Lanier 5625 - Manual (Page 125)

If You Cannot Make Copies as You Want
113
5
If you cannot correct the problem by taking the above actions, please contact
your service representative.
Letter parts and photo
parts of an original are not
separated correctly. An original has screen let-
ters or low density letters. Adjust the Auto Separation
Sensitivity Level to a
“Text” level.
⇒
P.98 “Image
Adjustment”.
An original has a high con-
trast photo. Adjust the Auto Separation
Sensitivity Level to a “Pho-
to” level.
⇒
P.98 “Image Ad-
justment”.
An original has a photo
having sequence thin lines
with regular thin spaces.
Color parts of an original
are copied in black in Auto
Color Selection mode. The original image con-
tains small or thin color
parts. Adjust the A.C.S. Sensitivi-
ty Level to a “Full color”
level.
⇒
P.98 “Image Adjust-
ment”.
Non-color parts of an origi-
nal are copied in color in
Auto Color Selection
mode. The machine might detect
some black and white
screen images (such as
from newspaper) as a full
color original. Select Black Copy mode.
⇒
P.31 “Black copy mode”.
Adjust the A.C.S. Sensitivi-
ty Level to a “B&W” level.
⇒
P.98 “Image Adjustment”.
A copy image is blurred. The image density is too
light. Adjust the image density.
⇒
P.28 “Adjusting Copy Im-
age Density”.
An improper kind of paper
is set. Set the right kind of paper
in the paper tray.
Note
❒ Copies might be blurred
if you copy onto rough
grain, coated, or damp
paper.
Problem Cause Action