Lucent Technologies DEFINITY Enterprise Communications Server - Manual (Page 21)

DEFINITY® Enterprise Communications Server Release 7
Console Operations Quick Reference
555-230-890
Issue 3
June 1999
Console Operations
17 Basic Operation
■
The Position Available lamp goes on.
■
The console returns to the normal operating mode.
Auto Start and Don’t Split
Auto Start is an administrable feature that allows you to initiate a phone call by
pressing any button on the dial keypad. If you are on an active call and you dial
digits on the keypad, the console automatically splits the call and begins dialing
the next call. When the Auto Start feature is enabled, the
START button is disabled.
To disable the Auto Start feature, use the Don’t Split feature. This allows the
switch to send the digits you dial to the other end. Use the Don’t Split feature if
you need to send touch-tone digits to the far end to pick up answering machine
messages when Auto Start is administered.
Auto Start
To use the Auto Start feature, perform the following:
1. To extend (transfer) an active call to another extension, begin dialing the
digits of the extension.
■
The active call is split away automatically from the console.
2. Press the RELEASE button to transfer the call.
Don’t Split
To use the Don’t Split feature, perform the following:
1. Press the DON’T SPLIT button to send touch tones on an active call.
■
The call remains active.
2. Dial the keypad digits for the call.
■
The touch tones are sent to the far end.
3. Press the DON’T SPLIT button again to cancel the Don’t Split feature.
Class of Restriction
When users request that you place long-distance or even local calls, you should
check their assigned class of restriction (COR) before you complete the call. If
they are not restricted from certain calls, you may complete the call for them.
230890_3.bk Page 17 Tuesday, April 20, 1999 12:57 PM