Lucent Technologies DEFINITY Enterprise Communications Server - Manual (Page 39)

DEFINITY® Enterprise Communications Server Release 7
Console Operations Quick Reference
555-230-890
Issue 3
June 1999
Console Operations
35 Feature Operation
4. Use one of the following steps, a, b, c, or d, to complete the call.
a. To transfer the call, press the RELEASE button as soon as the call
starts ringing.
■
The calling person is connected to the ringing phone line.
■
You are disconnected from the call.
■
The Split lamp goes off.
■
The call appearance lamp goes off.
■
The display goes blank.
■
The Position Available lamp goes on.
■
The console returns to the normal operating mode.
b. If you want to announce the call, wait for the called person to
answer. If the called person accepts the call, press the RELEASE
button.
■
The calling person is connected to the called person.
■
You are disconnected from the call.
■
The Split lamp goes off.
■
The call appearance lamp goes off.
■
The display goes blank.
■
The Position Available lamp goes on.
■
The console returns to the normal operating mode.
c. If the called person does not want to talk to the calling person, does
not answer, or the number is busy, press the CANCEL button.
■ The outgoing call is canceled.
■
The call progress tone stops.
■
The console is connected to the original call.
■
The Split lamp goes off.
Explain to the calling person that the called person is not available.
Take a message, or ask the calling person to try again later. Then
press the
RELEASE button.
■
You are disconnected from the call.
■
The Split lamp goes off.
■
The call appearance lamp goes off.
■
The display goes blank.
230890_3.bk Page 35 Tuesday, April 20, 1999 12:57 PM