Lucent Technologies DEFINITY Enterprise Communications Server - Manual (Page 34)

DEFINITY® Enterprise Communications Server Release 7
Console Operations Quick Reference
555-230-890
Issue 3
June 1999
Console Operations
30 Feature Operation
To use Loudspeaker Paging with paging buttons, perform the following:
1. Press an idle paging zone button. If the desired paging zone is already in
use (the associated lamp is on), select another zone or wait for that zone to
become idle (the associated lamp is off).
■
The lamp for the selected paging zone goes on.
■
If the PAGE ALL button is selected, all paging zone lamps go on.
2. Speak into the handset to make the announcement.
■
The announcement was heard in the selected zone(s). If the
announcement lasted too long, you will hear intercept tone; release
the button and try again.
3. Press the RELEASE button.
To use Loudspeaker Paging with trunk access codes, perform the following:
1. Press the START button or an idle call appearance button.
■
You hear a dial tone.
■
The call appearance lamp goes on.
■
The Position Available lamp goes off.
2. Dial the trunk access code for the zone you wish to page.
■
If you hear confirmation tone, continue with Step 3.
■
If you hear busy tone, the zone is not available; press the CANCEL
button and try again later.
3. Speak into the handset to make the announcement.
■
The announcement was heard in the selected zone(s). If the
announcement lasted too long, you will hear intercept tone; try again
with a shorter announcement.
4. Press the RELEASE button.
Override
The Attendant Override of Diversion feature allows you to bypass these features:
■
Call Forwarding
When the attendant calls a user that has Call Forwarding active, the call
rings at the user’s telephone and is not forwarded.
230890_3.bk Page 30 Tuesday, April 20, 1999 12:57 PM