Lexmark C762 - Manual (Page 82)

PJL
3-3
ENTER LANGUAGE Command
This command causes the printer to enter the specified language, such as
PCL emulation, PostScript emulation, or PPDS.
Syntax:
@PJL ENTER LANGUAGE = language[<CR>]<LF>
Notes:
• language is PCL , PCL3, PCLXL , PostScript , or PPDS .
• You can use uppercase, lowercase, or mixed case. ( @PJL must be uppercase;
all others can be mixed or lowercase.)
Example:
@PJL ENTER LANGUAGE = PostScript[<CR>]<LF>
enters PostScript emulation.
COMMENT Command
This command lets you add descriptive comments to your PJL job.
Syntax:
@PJL COMMENT words[<CR>]<LF>
Notes:
•
When the printer receives this command, it is ignored.
• The words parameter can be any combination of printable characters,
spaces, and horizontal tabs.
• The COMMENT command is terminated by the line feed character (<LF>).