Panasonic Web-Server FP - Manual (Page 31)

Hardware Description FP Web-Server V2.11
20
2.6 Installation
ATTENTION!
Be sure to install the FP Web-Server unit in locations
designed for electrical equipment, e.g. in a closed metal
cabinet such as a switch cabinet.
Make sure you are not electrostatically charged before you
touch the FP Web-Server or one of its units: the discharge of
static electricity can damage parts and equipment.
Please install the FP Web-Server in the following order:
1. Mount the unit on the DIN rail on which the FP0 PLC is mounted
For detailed information refer to Mechanical Installation (see page 24).
2. Before connecting the power supply, please read the information on Power
Supply (see page 29)
3. Connect the Ethernet (10BaseT) with a standard cable
4. Connect the PLC via RS232C
Please read the information on wiring under PLC Connection, Cable Drawings,
Modem (see page 162) or the "FP Web-Server Leaflet".
5. Configuration: For the first configuration and how to get started with the
Configurator please refer to First Steps (see page 31)
This is a brief description on how to put an FP Web-Server into operation. For a
detailed description please also refer to First Steps (see page 31).