Panasonic Web-Server FP - Manual (Page 44)

FP Web-Server V2.11 3.2 The Ethernet Network
33
3.2 The Ethernet Network
The FP Web-Server is supplied with a 10BaseT Ethernet connection. This type of Ethernet
network uses a pier to pier connection with twisted pair cables. To establish a network, hubs
and switches are used to connect the participants in a star-shaped manner.
To be able to configure the FP Web-Server, a Windows computer with an Ethernet network
interface card has to be connected to the same network as the FP Web-Server. The FP
Web-Server can be connected to an existing Ethernet network.
It is also possible to set up a separate network for the FP Web-Server. The computer can also
be directly connected to the FP Web-Server by using a special "cross-over" Ethernet cable (see
page 168).