Panasonic Web-Server FP - Manual (Page 77)

Email Setup FP Web-Server V2.11
66
B) Internet email
The FP Web-Server can also use a modem connected to the 9-pin port to dial up the Internet
and send emails via an Internet Service Provider.
When using this function you need a modem (or GSM module) and the following parameters
(also refer to "Example7" of the description of HTML examples).
• Dialup ISP account and DNS server address, for detailed information refer to Internet
Email Settings (see page 130)
• Two email server names (SMTP and POP3), for detailed information refer to the online
help under email server settings
• Email account with user name and password, also see email server settings
• Email
sender address
These parameters are available at your ISP (for detailed information also refer to the online help
under email server settings).
6.1.6 How to Find out the Address of the Email Server
Normally the name of the email servers can be found on the Internet pages of the email-ISP.
See sections on the Internet page called ‘Technical details’, ‘Experts’ or ‘How to setup email
client program’. Please also make sure that no ASMTP (special encrypted login method) is
needed. The FP Web-Server only supports plain ‘SMTP after POP3’ authentication.