Panasonic Web-Server FP - Manual (Page 32)

FP Web-Server V2.11 2.7 Important Notes
21
2.7 Important Notes
Please also see the installation sheet "FPWEB_Server_Leaflet" supplied with your FP
Web-Server for important notes, cables and installation.
Please read the following notes carefully before installing your FP Web-Server.
1. Avoid installing the unit in the following locations:
- Ambient temperatures outside the range of 0°C to 55°C/32°F to 131°F
- Ambient humidity outside the range of 30% to 85% RH
- Sudden temperature changes causing condensation
- Inflammable or corrosive gases
- Excessive airborne dust or metal particles
- Fuel, paint thinner, alcohol or other organic solvents or strong alkaline solutions
such as ammonia or caustic soda
- Excessive vibration or shock
- Direct sunlight
- Water in any form including spray or mist
2. Avoid noise interference from the following items:
- Influence from power transmission lines, high voltage equipment, power cables,
power equipment, radio transmitters, or any other equipment that would generate
high switching surges.
- If noise occurs in the power supply line even after the above countermeasures are
taken, it is recommended to supply power through an insolated transformer, noise
filter, or the like.
3. Measures regarding heat discharge:
- Always install the unit orientated with the tool port facing outward on the bottom in
order to prevent the generation of heat.