Pelco Dx8000 - Manual (Page 26)

26 C623M-C (3/05)
To complete the mandatory password change for the Admin account:
The Set Admin Password dialog box opens automatically.
1. Enter a new password in the New Password field.
2. Enter the password again in the Confirm Password field to confirm the password.
3. Click OK.
Figure 17. Set Admin Password Dialog Box
SHUTTING DOWN
To shut down the DX8000 Series DVR:
1. Go to File > Exit.
2. Select Shut down.
3. Click OK.
Figure 18. Shut Down Dialog Box
NOTE: Only users with Administrator and Power User accounts are allowed access to DX8000’s setup functions.
NOTE: You must have Power User or Administrator access to shut down the DX8000. Refer to the Operation/Programming manual for
information on user security levels. You must also have a Windows password to shut down. For information on the Windows default
password, refer to the Important Security Information for System Admisnistrators guide.
ᕡ
ᕣ
ᕢ
ᕣ
ᕢ