Pelco Dx8000 - Manual (Page 47)

C623M-C (3/05) 47
ENABLING IPSEC SECURITY SERVICES
In order to communicate with a networked DX8000 Series DVR, IPSec security must be enabled on your PC computer.
To enable IPSec security services:
1. Go to Start > Manage IPSec Policy. The DX8000 IPSec Policy dialog box opens.
Figure 41. Enabling IPSec Security for the PC Client Application
2. Select the Enable DX8000 IPSec Policy check box if it is not already selected.
DISABLING IPSEC SECURITY SERVICES
To disable IPSec security services:
1. Go to Start > Manage IPSec Policy. The DX8000 IPSec Policy dialog box opens.
Figure 42. Enabling IPSec Security for the PC Client Application
2. De-select the Enable DX8000 IPSec Policy check box.
IMPORTANT: Disabling IPSec security services may hamper your PC’s ability to communicate with DX8000 servers. Consult your system
administrator before disabling IPSec security.
NOTE: Refer to the DX8000 Client Applications manual for instructions on using the DX8000 Client applications.