Appendix a: printer setup, Printer hardware setup – Pelco Dx8000 User Manual
Page 57
C623M-C (3/05)
57
Appendix A: Printer Setup
PRINTER HARDWARE SETUP
To print still images of recorded video from the DX8000 DVR, you must install a Windows-compatible printer using the procedure below.
Ensure that a printer has been connected to the LPT1 printer port or a USB port of the DVR or that a shared printer is available on the network.
To connect a printer to the DVR:
1. Shut down the DX8000. For more information about shutting down the DX8000, refer to
2. Connect the printer to the DX8000 using a standard parallel printer cable connected to the LPT1 port on the back panel of the DVR.
or
Connect the printer to the DX8000 using a standard USB cable connected to one of the four USB 2.0 ports on the back panel of the DVR.
3. Connect the printer’s power cord.
4. Restart the DX8000.
5. Set the printer’s power switch to On.
IMPORTANT: Only printers listed on the Microsoft Windows 2000 Hardware Compatibility List and exhibiting the Designed for Microsoft
Windows XP logo are supported by the DX8000. If installing a network printer, consult your network administrator for directions.