Pelco Dx8000 - Manual (Page 53)

C623M-C (3/05) 53
6. Click OK. The DX8000 Web client ActiveX control installation dialog box opens.
Figure 51. Security Warning Dialog Box: ActiveX Control Installation
7. Click Yes.
8. Wait while the ActiveX controls are downloaded to your PC and your browser software is updated.
9. Install and enable IPSec security services. Refer to Installing the PC Client Application on page 44 or Installing the Client Emergency Agent
Application on page 48 for instructions on installing IPSec security services. Refer to Enabling IPSec Security Services on page 47 for
instructions on how to enable IPSec security services.
RECOMMENDED SYSTEM REQUIREMENTS FOR MOBILE (PDA) CLIENT
• PDA Hardware: A Pocket PC-compatible handheld device
• Processor: Intel Xscale ® , compatible with a minimum processor speed of 400 MHz
• Memory: 64 MB of RAM
• Video: TFT liquid crystal display with minimum 240 x 320 display resolution, 64K colors
• Operating System: Microsoft Pocket PC 2002 or later
• A PC with Windows operating system and Microsoft ActiveSync ® version 3.5 or later installed
• Wired or wireless networking capability
NOTES:
• You must install either the PC Client application or the Client Emergency Agent application to install IPSec security services.
• Refer to the DX8000 Client Applications manual for instructions on using the DX8000 Client applications.