Pelco Dx8000 - Manual (Page 37)

C623M-C (3/05) 37
STATIC IP SETUP
To set up a static IP address, enter the following information in the fields provided. This information can be obtained from your network adminis-
trator.
1. Verify that the Obtain An IP Address Automatically (DHCP) check box is not selected.
2. Enter a unique IP address (for example, 10.0.0.101). The last three digits must be different for each recorder (for example, 101, 102, 103,
and so forth).
3. Enter the subnet mask (for example, 255.0.0.0).
4. Enter the default gateway address (the IP address of the default router on your immediate network segment).
5. Click Apply.
Figure 30. Static IP Setup
ᕣ
ᕥ
ᕤ ᕢ ᕡ