Rs-422/rs-485 port settings, Refer to – Pelco Dx8000 User Manual
Page 42
42
C623M-C (3/05)
RS-422/RS-485 COMMUNICATION PORT SOFTWARE CONFIGURATION
To configure the RS-422/RS-485 ports in software:
1. Click .
2. Click .
3. Click the Port tab.
4. From the drop-down box, select the port number you wish to configure.
5. Configure the port settings using the drop-down boxes provided. Refer to Table C.
6. Click Apply.
NOTE: The system must be powered on, and you must be logged in as a Power User or Administrator to configure communication port
settings.
NOTE: Refer to the instructions that came with your peripheral device for correct settings.
Table C. RS-422/RS-485 Port Settings
Setting
Options
Device
None or Spectra
Interface Mode
RS-422 or RS-485
Baud Rate
2400, 4800, 9600, 19200, 28800, 38400, 57600, or 115200
Parity
None, Odd, or Even
Data Bits
5, 6, 7, or 8 bits
Stop Bits
1 or 2 bits