Pelco Dx8000 - Manual (Page 78)

78 C623M-C (3/05)
5. Click the Alarms tab.
6. Adjust the Critical Battery Alarm slider to the desired power level threshold.
7. Click Alarm Action under “Critical battery alarm.” The Power Options Properties dialog box opens.
Figure 88. Power Options Properties Dialog Box
NOTE: The slider can be adjusted to signal an alarm when UPS battery power falls below the level you select. It is suggested that you set
the value that provides at least five minutes of power in order to shut down the DX8000 safely. Refer to the documentation supplied with
your UPS to determine the percentage value that will provide at least five minutes of reserve power.
ᕥ
ᕦ
ᕧ