Auto-off delay, To set the auto-off delay, On while charging settings – Palm Zire 21 User Manual
Page 159: To change the on while charging settings, Auto-off delay on while charging settings
General preferences
149
Auto-off delay
Your handheld has an automatic shutoff feature that turns off the power after a
period of inactivity. This feature helps conserve battery power in case you forget
to turn off your handheld.
If you find that your handheld shuts itself off before you finish reviewing the
information on the screen, you should increase the time setting of the automatic
shutoff feature.
To set the Auto-off delay:
1.
Tap the Auto-off pick list.
2.
Tap the setting you want to use for the automatic shutoff feature: 30 seconds,
1 minute, 2 minutes, or 3 minutes.
On while charging settings
You can choose to leave your handheld on when it is connected to the HotSync
cable, or when you are recharging the battery, so you can continue to view your
data.
To change the on while charging settings:
■
Tap the On While Charging check box to leave your handheld on when it is
attached to the cable or power adapter.