6 ink film – Panasonic KX-FG2451 User Manual
Page 11
1. Introduction and Installation
11
For assistance, please visit http://www.panasonic.com/consumersupport
Installation
1.6 Ink film
The included film roll is a starter ink film.
1.6.1 Installing the ink film
1
Open the front cover.
2
Release the back cover by pushing the green button
(
1).
3
Open the back cover.
4
Insert the blue gear of the ink film roll into the front
left slot of the unit (
2) and the white gear of the ink
film roll into the rear left slot of the unit (
3).
L The ink film is safe to touch and will not rub off on
your hands like carbon paper.
L Make sure the blue gear (2) and white gear (3)
are installed as shown.
5
Turn the blue gear (
4) in the direction of the arrow
until the ink film is tight (
5) and at least one layer of
ink film is wrapped around the blue core (
6).
1
3
2
4
5