Panasonic KX-FG2451 - Manual (Page 49)

8. Programmable Features
49
Setting flash time *1 Base unit:
{#}{7}{2} The flash time depends on your telephone exchange or host PBX.
{1} “700ms” (default)
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “110ms”
{7} “100ms”
{8} “90ms”
Note:
L If the unit is connected via a PBX, this setting may need to be
changed in order for PBX functions (transferring a call, etc.) to
work correctly. Consult your PBX supplier for the correct
setting.
Cordless
handset:
{0}{5}{2} {1} “700ms” (default)
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “110ms”
{7} “100ms”
{8} “90ms”
Setting the Caller ID
number auto edit
feature Base unit:
{#}{7}{5} For the base unit auto edit feature only:
{0} “OFF”
{1} “ON” (default)
See page 26 for details.
Cordless
handset:
{0}{4} For the cordless handset auto edit feature only:
{0} “Off”
{1} “On” (default)
See page 26 for details.
Setting the connecting
tone {#}{7}{6} If you often have trouble when sending faxes, this feature allows
you to hear connecting tones: fax tone, ring back tone and busy
tone. You can use those tones to confirm the status of the other
party’s machine.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear connecting tones.
Note:
L If the ring back tone continues, the other party’s machine may
not be a fax machine or may have run out of paper. Check with
the other party.
L The connecting tone volume cannot be adjusted.
Changing the receiving
mode in the AUTO
ANSWER setting
{#}{7}{7} {1} “TAM/FAX” (default): Telephone Answering Machine/Fax
mode (page 34)
{2} “FAX ONLY”: Fax only mode (page 34)
Feature Feature code Selection