Panasonic KX-FG2451 - Manual (Page 26)

3. Telephone
26
3.10.2 With the base unit
1 {CALLER ID}
2 Press {B} to search from the recently received caller
information.
L If you press {A}, the display order will be
reversed.
3 Press {SP-PHONE} to return the call.
L To send a fax, insert the document FACE DOWN
and press {FAX START}.
To change the way caller information is displayed
Press
{CALLER ID} repeatedly after step 2.
Example: SAM LEE
11:20A Jul.20
,
b
1-134-567-8901
11:20A Jul.20
,
3.10.3 Symbols and operations for caller
information
What “
,” means
“ ,” on the display means the call has already been
viewed or answered.
If the same person calls more than once
The number of times the same caller called (“
×2” to
“ ×9”) will be displayed. Only the date and time of the
most recent call will be stored.
Example: The same person called 3 times.
SAM LEE
10:30P Jul.20
×3
To stop viewing
Press {OFF} on the cordless handset or {STOP} on the
base unit.
To edit a telephone number before calling
back/storing
While displaying a desired caller information, press
{Edit} (soft key) on the cordless handset or {*} on the
base unit repeatedly. Each time you press
{Edit} (soft
key) on the cordless handset or {*} on the base unit,
the telephone number will be changed as follows:
A Local telephone number only (area code omitted)
B Area code – Local telephone number
C 1 – Area code – Local telephone number (“1” added)
L To return a call, press {TALK} or {SP-PHONE} on
the cordless handset or {SP-PHONE} on the base
unit.
L To store the number in the cordless handset
phonebook, follow from step 2 of the cordless
handset storing procedure on page 27.
L To store the number in the base unit phonebook,
follow from step 3 of the base unit storing procedure
on page 27.
3.11 Caller ID number auto edit
feature
Once you call back an edited number, the unit can
automatically edit other incoming phone numbers each
time you receive a call.
For example, you can use this feature to set the unit to
ignore the area code of callers in your area code, so that
you can call these local numbers using caller information
without dialing the area code.
To activate this feature, you must edit an item in the caller
list, then call that number. After that, calls from that
caller’s area code will be edited automatically.
This feature can be turned ON using either the cordless
handset or the base unit. The default setting is ON.
3.11.1 Turning ON the Caller ID number
auto edit feature (Cordless handset)
1 {MENU} i {0}{4}
2 Press
{1} to select “On”.
L Press {0} to select “Off”.
3 {Save} (soft key) i {OFF}
3.11.2 Turning ON the Caller ID number
auto edit feature (Base unit)
1 {MENU} i {#}{7}{5}
2 Press {1} to select “ON”.
L Press {0} to select “OFF”.
3 {SET} i {MENU}
Note:
L The cordless handset and base unit can remember
up to 4 area codes each to be edited. Phone
numbers from the 4 most recently edited area codes
will be automatically edited.
L This feature will not be activated until edited numbers
are called back.
L If you move to another area, you can turn this feature
OFF to erase previously edited area codes. To use
this feature again, turn it ON and reprogram the area
codes you want to edit once again.
{CALLER ID}
{STOP}
{FAX START} {A}{B}
{SP-PHONE}