Panasonic KX-TC1871ALB - Manual (Page 30)

30
“ Making calls
To dial after confirming the entered number
1 Dial a phone number.
≥ If you misdial, press
(INTERCOM/CLEAR)
. All
digits are erased. Dial the correct phone number.
2 Press (TALK) .
≥ After a few seconds, the display will show
the length of the call and the battery strength.
3 To hang up, press (TALK) or place
the handset on the base unit.
To redial after confirming the last number dialled
Press (REDIAL/PAUSE) ¤ (TALK) .
To select the receiver volume
Press (‹) or (›) while talking.
≥ Each time you press (‹) or (›) ,
the volume level will change.
≥ The display will return to the length of
the call.
≥ Your phone comes from the factory
set to MEDIUM.
≥ When you replace the battery,
the selected receiver volume setting will
return to the factory set (MEDIUM).
Reprogram if necessary.
Backlit LCD display
The backlit handset display will stay on for about 10 seconds after
pressing a handset button or lifting the handset off the base unit.
Backlit handset keypad
The handset dialling buttons will light when you press a button or lift the
handset off the base unit, and flash when a call is received. The lights will
go out about 10 seconds after pressing a button, lifting the handset or
answering a call.
Talk
0233334444
Talk
00-00-00
0233334444
Loud
Low ❚ ❚ ❚ ❚ ❚ ❚ High
Loud
Low ❚ ❚ ❚ ❚ ❚ ❚ High
HIGH
MEDIUM
Loud
Low ❚ ❚ ❚ ❚ ❚ ❚ High
LOW
(‹)
(‹)
(›)
(›)
PQQX12877ZA-3 00.8.23 10:50 AM y [ W 30