Panasonic KX-TC1871ALB - Manual (Page 44)

“ Using the Caller List
44
≥ You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH) .
≥ If the display shows “ Directory full ” in step 3, the display will return to
step 2. Press
(FUNCTION/EXIT/CH)
to exit the list. To erase other stored items
from the directory, see page 58.
≥ You cannot store caller information in the directory if a phone number is not
displayed.
≥ If the display shows “ Save error ” or “ No link to base. Place on
cradle and try again .” in step 3, the item cannot be stored in the directory.
Try again from step 1.
For New Zealand Users:
Your telephone service provider may charge you for a local call when
it is dialled with an area code prefix. If the charge for local call is
unacceptable, only the 7-digits of the local number should be dialled
from your telephone. Do not dial the “0” prefix or the area code digit.
PQQX12877ZA-3 00.8.23 10:50 AM y [ W 44