Panasonic KX-TC1871ALB - Manual (Page 94)

“ Before Requesting Help
94
Problem
You cannot program items,
such as the dialling mode.
Previously programmed
information is erased.
“ Recharge battery ” is
displayed, “ ” flashes or
the unit beeps intermittently.
You charged the battery
fully, but “
Recharge
battery ” is still displayed
and/or “ ” continues to
flash.
The IN USE/CHARGE
indicator light does not go
out while charging.
Cause and Remedy
≥ Programming is not possible while the
unit is in the talk or speakerphone
mode, when viewing the Caller
List/directory list, or while the answering
system is in use.
≥ Do not pause for over 60 seconds while
programming.
≥ Move closer to the base unit.
≥
(›) , (‹) , BACK
(fi) or FWD/EDIT
(fl)
may have been pressed when you
picked up the handset. Press
(FUNCTION/EXIT/CH) and try again.
≥ If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
≥ Charge the battery fully (p. 15).
≥ Clean the charge contacts and charge
again (p. 16).
≥ Install a new battery (p. 88).
≥ This is normal.
For New Zealand Customers
Panasonic New Zealand operates a toll free Customer Support
Centre.
Please phone 0800 Panasonic (0800 726276) for assistance.
PQQX12877ZA-6 00.8.23 10:54 AM y [ W 94