Panasonic KX-TC1871ALB - Manual (Page 72)

72
“ Pager Call
Storing Your Home Telephone Number
After storing your home telephone number, it will then be displayed on
your pager when your family wants you to call home. (See useful
information on page 73.)
1 Press (FUNCTION/EXIT/CH) .
2 Press (›) or (‹) repeatedly until the arrow
points to “ Program ”.
3 Press FWD/EDIT
(fl) ( Yes key).
4 Press (›) or (‹) repeatedly until the arrow
points to “ TAD program ”.
5 Press FWD/EDIT
(fl) ( Yes key).
≥ The base unit display shows the function menu
for the answering system.
6 Press (7) .
7 Enter your home telephone number up to 11 digits.
≥ The entered number is displayed on the base unit.
≥ If you misdial, press
(INTERCOM/CLEAR)
and enter the correct number.
8 Press FWD/EDIT
(fl) ( Save key).
≥ A beep sounds.
≥ To return to the standby mode, press (FUNCTION/EXIT/CH) .
≥ Your pager will also display your home number if the unit receives a call from an
area which does not provide the Caller ID service or the caller requests not to
show their information. Please call home to check who alerted your pager.
Ringer volume
1 Program
43 1 =Yes
1 Save DIRECT#
Set recall time
43 1 =Yes
1 TAD program
43 1 =Yes
Answering
system setting.
See base unit.
Enter home no.
Base unit display
PQQX12877ZA-5 00.8.23 10:53 AM y [ W 72