Panasonic KX-TC1871ALB - Manual (Page 17)

17
Preparation
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Otherwise a second caller’s information may not be displayed (p. 62), and
the unit may not alert your pager (p. 70). Your phone comes from the
factory set to “A”.
Make sure the unit is in the standby mode.
1 Press (FUNCTION/EXIT/CH) .
2 Press (›) or (‹) repeatedly until the arrow
points to “ Program ”.
3 Press FWD/EDIT (fl) ( Yes key).
4 Press (›) or (‹) repeatedly until the arrow
points to “ Set line mode ”.
5 Press FWD/EDIT (fl) ( Yes key).
6 Press (›) or (‹) to select “ B ” or “ A ”.
Press FWD/EDIT (fl) ( Save key).
≥ A beep sounds.
≥ To return to the standby mode, press
(FUNCTION/EXIT/CH) .
≥ You can exit the programming mode any time by pressing
(FUNCTION/EXIT/CH)
.
1 Save directory
Calling pager
43 1 =Yes
Ringer volume
1 Program
43 1 =Yes
1 Save DIRECT#
Set recall time
43 1 =Yes
1 Set line mode
Talk switching
43 1 =Yes
Line mode
:A
43 1 =Save
Line mode
:B
PQQX12877ZA-2 00.8.23 10:49 AM y [ W 17