Panasonic KX-TC1871ALB - Manual (Page 27)

27
Preparation
“
Selecting the Caller’s Recording Time
You can select “1 minute”, “3 minutes” or “Greeting only” for the caller’s
recording time. Your phone comes from the factory set to “3 minutes”.
1 Press (FUNCTION/EXIT/CH) .
2 Press (›) or (‹) repeatedly until the arrow
points to “ Program ”.
3 Press FWD/EDIT (fl) ( Yes key).
4 Press (›) or (‹) repeatedly until the arrow
points to “ TAD program ”.
5 Press FWD/EDIT (fl) ( Yes key).
≥ The base unit display shows the answering
system function menu.
6 Press (5) .
≥ The current setting is displayed on the base
unit.
7 Press (1) , (2) or (3) to select the recording time.
1: 1 minute
2: 3 minutes (factory preset)
3: Greeting only
8 Press FWD/EDIT (fl) ( Save key).
≥ A beep sounds.
≥ To return to the standby mode, press
(FUNCTION/EXIT/CH)
.
If you select “Greeting only”, the unit will answer a call with the
greeting message, and then hang up. The unit will not record any
incoming messages.
Ringer volume
1 Program
43 1 =Yes
1 Save DIRECT#
Set recall time
43 1 =Yes
1 TAD program
43 1 =Yes
Answering
system setting.
See base unit.
1 Save directory
Calling pager
43 1 =Yes
Recording time
:3min
Base unit display
PQQX12877ZA-2 00.8.23 10:49 AM y [ W 27