Panasonic KX-TC1871ALB - Manual (Page 69)

69
Answering System
Erasing Messages
The unit will announce the remaining recording time after playback, if it is
less than 5 minutes. New messages cannot be recorded when:
—“
Memory full ” is heard.
—“ Message full ” is displayed on the base unit.
—the ANSWER ON indicator flashes rapidly.
Erase some, or all, of the messages. We recommend you erase
unnecessary messages after each playback.
Erasing a specific message
Press (ERASE/CLEAR) while the message you want to erase is being
played.
≥ The unit erases the message.
≥ A short beep will sound and the unit will continue to play the next message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at
one time.
1 Press (ERASE/CLEAR) .
≥ “ Press ERASE again to erase all
messages ” is heard.
2 Within 5 seconds, press
(ERASE/CLEAR) again.
≥ A beep sounds and “ No messages ” is
heard.
≥ The base unit display shows
“
0 message ”.
≥ The information in the Caller List will not be erased. To erase Caller List
information, see page 45.
(ERASE/CLEAR)
ANSWER ON Indicator
PQQX12877ZA-5 00.8.23 10:53 AM y [ W 69