Panasonic KX-TC1871ALB - Manual (Page 77)

77
Answering System
“
Setting the Remote Code
The remote code prevents unauthorized people from accessing your unit
and listening to your messages. Choose any 2-digit number (00–99).
The factory preset remote code is “11”. If you do not program your own
remote code, you can use “11”.
Make sure that the unit is in the standby mode.
1 Press (FUNCTION/EXIT/CH) .
2 Press (›) or (‹) repeatedly until the arrow
points to “ Program ”.
3 Press FWD/EDIT (fl) ( Yes key).
4 Press (›) or (‹) repeatedly until the arrow
points to “ TAD program ”.
5 Press FWD/EDIT (fl) ( Yes key).
≥ The base unit display shows the function menu
for the answering system.
6 Press (1) .
≥ The current remote code is displayed on the
base unit.
7 Enter a remote code using a 2-digit
number (00–99).
8 Press FWD/EDIT (fl) ( Save key).
≥ A beep sounds.
≥ To return to the standby mode, press (FUNCTION/EXIT/CH) .
≥ If 6 beeps sound during programming, a wrong key was pressed. Enter
the correct number.
To check the remote code
Repeat steps 1 to 6.
≥ The current remote code is displayed on the base unit. When finished, press
(FUNCTION/EXIT/CH) .
Ringer volume
1 Program
43 1 =Yes
1 Save DIRECT#
Set recall time
43 1 =Yes
1 TAD program
43 1 =Yes
Answering
system setting.
See base unit.
Remote code
:11
Base unit display
PQQX12877ZA-5 00.8.23 10:53 AM y [ W 77