Pioneer FH-P9200MP - Manual (Page 25)

2Press RPT to select the repeat range.
Press RPT until the desired repeat range ap-
pears in the display.
! Folder repeat  Repeat the current folder
! Track repeat  Repeat just the current
track
! Disc repeat  Repeat all tracks
Notes
! If you select other folder during repeat play,
the repeat play range changes to Disc repeat.
! If you perform track search or fast forward/re-
verse during Track repeat, the repeat play
range changes to Folder repeat.
! When Folder repeat is selected, it is not pos-
sible to play back a subfolder of that folder.
! When the repeat mode is exited, either T.RPT
(one-track repeat) or FOLDER PRT (folder re-
peat) may appear on the basic display.
Playing tracks in a random
order
Random play lets you play back tracks in a
random order within the repeat range,
Folder repeat and Disc repeat.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2Press FUNC and then press RDM to se-
lect the random mode.
3 Press RDM to turn random play on.
The light illuminates. Tracks will play in a ran-
dom order within the previously selected
Folder repeat or Disc repeat ranges.
# To turn random play off, press RDM again.
Note
When the random mode is exited while random
play is on, RDM appears on the basic display.
Scanning folders and tracks
While you are using Folder repeat, the begin-
ning of each track in the selected folder plays
for about 10 seconds. When you are using
Disc repeat, the beginning of the first track of
each folder is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2Press FUNC and then press SCAN to se-
lect the scan mode.
3 Press SCAN to turn scan play on.
The light illuminates. The first 10 seconds of
each track of the current folder (or the first
track of each folder) is played.
4 When you find the desired track (or
folder) press SCAN to turn scan play off.
The light goes off. The track (or folder) will con-
tinue to play.
# If the scan mode is automatically canceled,
select the scan mode again.
Notes
! After track or folder scanning is finished, nor-
mal playback of the tracks will begin again.
! When the scan mode is exited while scan play
is on, SCAN appears on the basic display.
Pausing MP3/WMA playback
Pause lets you temporarily stop playback of
the MP3/WMA.
MP3/WMA Player
En
25
English
Section
06