Adjusting the time alignment 46, Audio adjustments, Adjusting the time alignment – Pioneer FH-P9200MP User Manual

Page 46

Advertising
background image

1 Press AUDIO and then press NEXT to

display T.AL.

Press NEXT until T.AL appears in the display.

2Press T.AL to select the time alignment

mode.

# T.AL is inactive when neither FL nor FR is se-
lected in the position selector mode (POSI).

3 Press the corresponding button to se-

lect the time alignment.

Button

Time alignment

INTL

Initial

A.TA

Auto-time alignment

CUSTM

Custom

# To turn time alignment off, press the same
button again.
# You cannot select A.TA when NW mode has
been selected.
# A.TA is inactive if auto TA and EQ has not
been carried out.

4 Press BAND to cancel the time align-

ment mode.

Notes

! INTL is the factory supplied time alignment.
! A.TA is the time alignment created by auto TA

and EQ. (Refer to Auto TA and EQ (auto-time
alignment and auto-equalizing)

on page

54.)

! CUSTM is an adjusted time alignment that

you can create for yourself.

Adjusting the time alignment

You can adjust the distance between each

speaker and the selected position.

! An adjusted time alignment is memorized

in CUSTM.

1 Press AUDIO and then press NEXT to

display T.AL.

Press NEXT until T.AL appears in the display.

2Press T.AL to select the time alignment

mode.

# T.AL is inactive when neither FL nor FR is se-
lected in the position selector mode (POSI).

3 Press c or d to select the speaker to be

adjusted.

Each press of c or d selects the speaker in

the following order:

High Left (high-range left)High Right

(high-range right)Mid Right (middle-range

right)Mid Left (middle-range left)

Low Left (low-range left)Low Right (low-

range right)

Front Left (front left)Front Right (front

right)Rear Right (rear right)Rear Left

(rear left)Sub. W (subwoofer)

# You cannot select Sub. W when the subwoo-
fer output is off.

4 Press a or b to adjust the distance be-

tween the selected speaker and the listen-

ing position.

Each press of a or b increases or decreases

the distance.

400.0cm  0.0cm is displayed as the distance

is increased or decreased.

# You can adjust the distance for the other
speakers in the same way.

5 Press BAND to cancel the time align-

ment mode.

Audio Adjustments

En

46

Section

11

Advertising