Pioneer FH-P9200MP - Manual (Page 60)

Attenuating volume
The attenuator lets you lower the volume level
quickly (by about 90%).
% Press ATT to turn the attenuator on.
ATT appears in the display.
# Press ATT again to turn the attenuator off and
return to the original volume level.
Displaying and setting the
clock
You can turn the clock display on or off and
set the clock.
Turning the off clock display on
or off
If the off clock display is turned on, when the
sources and the feature demo are off, the
clock display appears on the display.
1 Press NEXT to display CLK.
Press NEXT until CLK appears.
2Press CLK and then press OFF CLK to se-
lect the off clock display mode.
3 Press OFF CLK to turn the off clock dis-
play on.
ON appears in the display.
# To turn the off clock display off, press OFF CLK
again.
Setting the date
The calender display adjusted in this mode ap-
pears only when sources and the feature
demo are off.
1 Press NEXT to display CLK.
Press NEXT until CLK appears.
2Press CLK and then press DATE to set
the date.
3 Press c or d to select the segment of
the calendar display you wish to set.
Pressing c or d will select one segment of the
calendar display:
DayMonthYear
4 Press a or b to set the date.
Pressing a will increase the selected day,
month or year. Pressing b will decrease the
selected day, month or year.
Setting the clock
1 Press NEXT to display CLK.
Press NEXT until CLK appears.
2Press CLK and then press TIME to set
the clock.
3 Press c or d to select the segment of
the clock display you wish to set.
Pressing c or d will select one segment of the
clock display:
HourMinute
4 Press a or b to set the clock.
Pressing a will increase the selected hour or
minute. Pressing b will decrease the selected
hour or minute.
Matching the time to a time signal
1 Press NEXT to display CLK.
Press NEXT until CLK appears.
2Press CLK and then press TIME to set
the clock.
Other Functions
En
60
Section
13